Miele DA2210 Instructions d'utilisation et d'installation - Page 28

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} Miele DA2210. Miele DA2210 36 pages. Cooker
Également pour Miele DA2210 : Manuel des dimensions (1 pages), Manuel d'utilisation et d'installation (40 pages), Instructions d'utilisation et d'installation (40 pages), Manuel de l'utilisateur (40 pages), Instructions d'utilisation et d'installation (40 pages), Manuel d'instructions d'installation (19 pages), Instructions d'utilisation et d'installation (44 pages)

Imprimer la page
Miele DA2210 Instructions d'utilisation et d'installation

Installation

Non-return flap
The hood comes equipped with a
non-return flap. This flap automatically
closes when the hood is turned off so
that no exchange of outside air and
room air can occur.
Uninstall the non-return flap when your
exhaust system is equipped with a
non-return flap or if the hood is used in
recirculation mode.
^ Holding the non-return flap at the
wire, pull it out of the bracket.
The DA 2280 is equipped with one, the
DA 2210 with two non-return flaps.
28
Installation
The hood is designed to be installed
within cabinetry and kitchen islands.
The top half (motor and fan assembly)
should be accessible after installation.
If the motor and fan assembly are not
accessible, assemble the ductwork and
the electrical connection before the
installation.
^ Insert and align the hood from the
bottom up in the cut out.
^ Secure the hood through the frame
with the screws (3.5 x 16 mm).