HP 100-000 Manuel d'installation rapide - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} HP 100-000. HP 100-000 29 pages. Quick setup guide - windows 8

Imprimer la page

dual-monitor setup (or for three monitors), and proceed to the instructions for ATI

Eyefinity Catalyst™ setup.

Verify that the PC is set up according to the instructions in the setup view.

Do not power on the PC or monitor.

Connect the monitors to an available display connector on the back of the

PC. The monitor's connection type must match the connector on the PC.

NOTE: The three-monitor setup requires that you separately purchase

an additional monitor and cable. The monitor should have a DVI, HDMI, or

VGA connector. A DVI-to-VGA adapter is required for monitors with a VGA

connector.

●

Connect power to each additional monitor.

Press the power button on each display and then press the power button on

the computer. The power indicator light on each of the displays will be

amber; the lights will turn blue when the PC starts.

NOTE: During the initial setup, only one display is active; you may see

various display states (such as blank screens, blue screens, etc.) on the

other displays until the setup is completed.

When the setup is complete, you will see the extended desktop on all

connected displays.

To change the display mode for a display, select Start, from the Start

screen, type c, select Control Panel, select Appearance and

Personalization, select Display, and then select the option you want to

change and follow the onscreen instructions.

ATI Eyefinity Catalyst™ setup

Right-click on the Eyefinity Catalyst™ icon on the desktop to bring up ATI

Catalyst Control Center™.

Select CCC-Advanced, select Graphics, and select Desktop & Displays,

then follow the onscreen instructions to set up the layout for the two- or

three-monitor display.

Chapter 3 Setting up additional features

DisplayPort

HDMI

Connect the DisplayPort cable to the DisplayPort connector (required).

Connect the DVI cable to the bottom DVI connector.

DVI