Allmatic B.RO X40 DISPLAY Manuel - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Allmatic B.RO X40 DISPLAY. Allmatic B.RO X40 DISPLAY 20 pages. 4 channels rolling code receiver, with display

Imprimer la page

WARNING: the short pressure of the MENU button during the parameter selection returns the process to the previous point. For

example: the brief pressure of the MENU button in channel 1 enabling menu (the display shows CH01) returns the process to the

selection of the function (the display shows F00 or the last function selected).

6/20

Press and hold the MENU button until the display shows:

Enable/disable hte key of the transmitter in the channel 2 with UP (+) and

DOWN (-) buttons of the receiver.

If the key is enabled, the display shows:

Press and hold the MENU button until the display shows:

Enable/disable hte key of the transmitter in the channel 3 with UP (+) and

DOWN (-) buttons of the receiver.

If the key is enabled, the display shows:

Press and hold the MENU button until the display shows:

Enable/disable hte key of the transmitter in the channel 4 with UP (+) and

DOWN (-) buttons of the receiver.

If the key is enabled, the display shows:

Press and hold the MENU button until the display shows:

The receiver waits for a new key to be memorized.

To quit, press brieﬂ y the MENU button or wait 10s of inactivity.

ITA

ENG

The display shows:

FRA

ESP

DEU

POR

6-1620020

rev.0

27/10/2015