Miele T 5206 Instructions d'utilisation et d'installation - Page 26
Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} Miele T 5206. Miele T 5206 36 pages. Tumble dryer
Également pour Miele T 5206 : Instructions d'utilisation et d'installation (36 pages)
Imprimer la pageInstallation - venting
Installation - venting
Fitting the exhaust ducting
The moist air produced during drying
has to be vented to the outside.
The dryer must only be operated
when it is correctly fitted with ex-
haust ducting.
The exhaust connection may be
made:
– to the rear of the machine (the ma-
chine is supplied as standard with
this connection point open) or
– to the left of the machine.
The side exhaust connection has a
cover cap.
Exhaust connection to the
side of the machine
Disconnect the machine from the
mains electricity supply.
Remove the cover cap.
Insert a thin screwdriver into the slit
on the retaining hook and press the
hook gently upwards.
26
At the same time turn the cover cap
anti-clockwise.
Vent socket
In the same way remove the vent
socket from the rear vent outlet.
Secure into the side outlet by turning
clockwise.
Close the rear outlet with the cover
cap.
Avoid:
– very long exhaust systems
– too many corners
– tight corners.
These reduce efficiency and increase
time and energy consumption.