Miele T 679 Ci Manuel d'utilisation - Page 30

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Miele T 679 Ci. Miele T 679 Ci 48 pages. Condenser tumble dryer

Imprimer la page

Problem solving guide

Check and indicator lights:

What to do if . . .

. . . the "Locked" indicator

light flashes when the ma-

chine is switched on.

. . . the "Locked" indicator

light comes on during drying.

. . . the "Drying" indicator

light flashes.

. . . the "Anti-crease/Finish"

light flashes.

. . . the "Empty out container"

light comes on.

. . . the "Clean out airways"

light comes on.

Cause . . .

The system lock is activated.

The programme cannot be

started.

That is not a fault.

The programme selector was

moved after the beginning of

the programme. The

programme continues to run

normally.

There could be a fault.

Cold surrounding temperatures

below freezing are affecting the

machine (frozen condensed

water).

The condensed water container

is full.

The fluff filters or the condenser

unit are blocked.

The electronics are registering

that the machine is

underloaded.

Remedy . . .

See section "Electronic system

lock".

The light will go out at the end of

the programme.

Turn the selector back to its

original position and the light

will go out.

–

Switch the machine off and

on again.

–

Select the programme and

press "START".

–

Install the appliance in a

warmer room.

If the light continues to flash there

is a problem. Contact Miele

Service Department.

Empty the container.

Check that the condensed

water container is correctly

positioned.

–

When the programme has

ended, clean the filters (see

section "Cleaning and care").

–

Clean the condenser unit

and check that it is correctly

positioned.

Always load the machine to full

capacity for economical drying.