Miele 10354220 Manuel de l'utilisateur - Page 23

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Miele 10354220. Miele 10354220 28 pages.

Imprimer la page

b Active AirClean 50 (black)

c AirClean Plus 50 (light blue)

d HEPA AirClean 50 (white)

Do not use more than one exhaust fil-

ter at a time.

When changing the filter please note:

1. If you wish to replace exhaust filter a

with filter b, c or d, it is essential that

you remove the filter grille before you

fit the new exhaust filter.

You must also activate the exhaust

filter change indicator (dia. 12).

2. If you wish to replace exhaust filter b,

c or d with filter a, it is essential that

you also fit the filter grille * (dia. 36).

* Filter grille - see "Optional ac-

cessories".

Maintenance indicator with reset but-

ton (dia. 39)

Some models are fitted with a mainten-

ance indicator.

The indicator lights up after approx. 50

hours of operation, which is equivalent

to about a year of average use. The

level of soiling of the dust compartment

filter and the exhaust filter must be

checked at this point.

If the filters are replaced, the indicator

must be reset. To do this the vacuum

cleaner must be switched on.

 Press the reset button.

The maintenance indicator will go out

and reset to zero.

The indicator can only be reset by

pressing the reset button after the

light has come on. Pressing the but-

ton at any other time will have no ef-

fect.

When to change the battery in the ra-

dio-control handle

Approximately every 18 months.

One 3 V battery (CR 2032) is required.

The vacuum cleaner can still be used

when the battery has run out or if

there is no battery fitted.

 To do so, switch the vacuum cleaner

on using the On/Off foot control .

The Standby indicator  on the va-

cuum cleaner will light up yellow.

 Press the restart button on the va-

cuum cleaner (dia. 40).

The vacuum cleaner can continue to be

used in this way, but only at maximum

power.

How to change the battery in the ra-

dio-control handle (dia. 41)

 Undo the screw cap on the battery

compartment using a screwdriver and

then remove the cover.

 Replace the battery with a new one,

making sure the polarity is correct.

 Replace the cover and tighten the

screw cap back up again.

 Dispose of the old battery in a desig-

nated recycling bin for batteries.