HP 8530w - EliteBook Mobile Workstation Manuel d'installation et de configuration - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et de configuration pour {nom_de_la_catégorie} HP 8530w - EliteBook Mobile Workstation. HP 8530w - EliteBook Mobile Workstation 18 pages. Hp elitebook mobile workstation
Également pour HP 8530w - EliteBook Mobile Workstation : Brochure & Specs (8 pages), Quickspecs (36 pages), Manuel de l'utilisateur (15 pages), Brochure & Specs (4 pages), Manuel du réseau (16 pages), Spécifications (4 pages), Manuel des accessoires (2 pages), Brochure & Specs (6 pages), Manuel de l'utilisateur (27 pages), Manuel de configuration (19 pages), Vue d'ensemble (16 pages), Manuallines (12 pages), Manuel d'installation du logiciel (8 pages), Manuallines (6 pages), Manuel (20 pages), Manuallines (7 pages), Manuel de l'utilisateur (28 pages), Quickspecs (47 pages)

Leave as 0.0.0.0 if this option is not needed.

h. Domain Name

i. Enter a domain name

Default Setting

Recommended Setting

20) Skip Provisioning Server.

Default Setting

Recommended Setting

This option is used in Enterprise mode when an Intel AMT Setup and Configuration

(Provisioning) server is available. This option will disappear once SMB mode is set in step 21.

21) Go into Provision Model.

a. Change to Small Business

Default Setting

Recommended Setting

i. Select Y.

This option is a toggle, the next time it is accessed the opposite setting is

prompted.

Notice that the Provisioning Server and Set PID and PPS options are no longer available

once the system is in Small Business mode. These options are used in Enterprise Mode.

b. Return to previous menu.

22) Skip Un-Provision.

This option is to return the system to factory defaults. See the Return to Default section for

more information on unprovisioning.

23) Check SOL/IDE-R.

a. A message window telling the user that the system resets after configuration changes

will appear.

i. Select Y.

b. Username and Password

Default Setting

Recommended Setting

i. Select Enabled.

This option allows users and passwords to be added from the WebGUI. If it is

disabled, then only the administrator has MEBx remote access.

c. Serial Over LAN

: None

: Network Dependent

: 0.0.0.0

: Network Dependent

: Enterprise

: Small Business

: Enabled