Miele HS14 Manuel d'utilisation - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Miele HS14. Miele HS14 29 pages. Vacuum cleaner

Imprimer la page

Replacing one type of exhaust filter

with another

Depending on model, your vacuum

cleaner will be fitted as standard with

one of the following exhaust filters

(dia. 29):

a Air Clean

b Active Air Clean SF-AAC 50 (black)

c Active HEPA SF-AH 50 (blue)

Please note:

1. If you wish to replace the Air Clean

filter a with an Active Air Clean filter b

or an Active HEPA filter c, it is essential

that you remove the filter grille before

fitting the new type of filter.

2. If you wish to replace the Active Air

Clean filter b or the Active HEPA filter c

with an Air Clean filter a, then it is

essential that you also fit the filter grille *,

see dia. 31.

* Filter grille – see "Optional

accessories".

Do not use more than one exhaust

filter at a time.

When to change the thread lifters

The thread lifters on the suction inlet of

the floorhead can be replaced.

Check them from time to time and

replace them if the pile has worn down.

How to replace the thread lifters (dia.

34 + 35)

^ Use a suitable screwdriver to remove

the thread lifters from the slots.

^ Fit new thread lifters.

Upholstery nozzle SPD 10

(depending on model) (dia. 36)

a Disengage the thread lifter unit at

each side of the upholstery nozzle

using a coin.

b Fit a new thread lifter unit and lock

into position.

Cleaning the roller on the floorhead

(dia. 37)

(not necessary for FiberTeQ and AirTeQ

floorheads)

a Release the bearing (with bayonet

fitting) using a coin.

b Press the bearing out, and remove it.

c Take out the roller.

^ Remove any threads and hair,

replace the roller and refit the

bearing.

Replacement parts are available from

your Miele retailer or from Miele (see

back cover for contact details).