Burk PlusConnect GatesAir ZXA Manuel d'installation et d'utilisation - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Burk PlusConnect GatesAir ZXA. Burk PlusConnect GatesAir ZXA 13 pages.

Imprimer la page

Troubleshooting

Connection Errors

If the PlusConnect is unable to communicate with the transmitter using SNMP, the Link LED on the

front panel of the PlusConnect will blink. Check that both the PlusConnect and transmitter are

connected to the network and configured properly.

If the network connection between the PlusConnect and ARC Plus is lost, the ARC Plus will log an alarm

after three minutes of network failure. The PlusConnect Link LED will also turn off.

Note: PlusConnect events and errors are logged to the ARC Plus event list, which is accessible by the

ARC Plus front panel and from AutoPilot.

Getting Help

For customer support, please email [email protected] or call our direct customer support line at 978-

486-3711. We will be glad to assist you. The customer support office is open Monday – Friday, 9AM to

5PM Eastern Time.

PlusConnect™ GatesAir ZXA Installation and Operation Manual