Miele S 4000 Series Manuel d'utilisation - Page 32

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Miele S 4000 Series. Miele S 4000 Series 36 pages. Miele vacuum cleaner user manual
Également pour Miele S 4000 Series : Manuel d'utilisation (44 pages), Manuel d'utilisation (40 pages), Manuel d'utilisation (48 pages), Manuel d'utilisation (36 pages), Manuel d'utilisation (36 pages), Manuel d'utilisation (40 pages), Manuel d'utilisation (40 pages)

Problem solving guide / After sales service

The vacuum cleaner switches off

automatically.

On certain models, the overheating

warning light also comes on.

A temperature limiter switches the

vacuum cleaner off automatically if it

gets too hot. Some models also have a

warning light , which comes on to

indicate that it has overheated.

This can occur if, for instance, large

articles block the suction tube or when

the filter bag is full or contains particles

of fine dust. A heavily soiled exhaust or

dust compartment filter can also be the

cause of overheating. Switch off the

vacuum cleaner using the On-Off

switch s. Disconnect from the

electricity supply. Switch off at the wall

socket and remove the plug.

After removing the cause, wait for

approx. 20 - 30 minutes to allow the

vacuum cleaner to cool down. It can

then be switched on again.

After sales service

In the event of a fault that you cannot

easily remedy, please contact

– your Miele dealer, or

– the nearest Miele Service

Department. (See address on back

page).

N.B. A call-out charge will be

applied for unnecessary service

visits where the problem could have

been rectified as described in this

instruction manual.

Please note that telephone calls may

be monitored and recorded for

training purposes.