Miele S 700 Series Manuel d'utilisation - Page 25

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Miele S 700 Series. Miele S 700 Series 44 pages. Miele s 700; s 718 vacuum cleaners
Également pour Miele S 700 Series : Manuel d'utilisation (44 pages), Manuel d'utilisation (44 pages), Manuel d'utilisation (44 pages), Manuel d'utilisation (36 pages), Manuel d'utilisation (44 pages), Manuel d'utilisation (36 pages)

Change the dustbag when the colour

marker in the dustbag change indicator

fills the display.

Dustbags are designed for single

use only. Do not attempt to re-use

them as suction would be reduced.

^ Attach the standard floorhead to the

suction tube. Do not use any of the

other floorheads or attachments as

they will cause the dustbag change

indicator to give a false reading.

^ Switch the vacuum cleaner on and

turn the rotary selector (if applicable)

to the highest power setting.

^ Lift the floorhead off the floor a little. If

the red marker completely fills the

dustbag change indicator you should

replace the dustbag with a new one.

The indicator is designed to measure

the air permeability of a dustbag

containing common household dust.

Normal household dust would contain a

mixture of dust, hair, carpet fluff,

threads, grit etc.

However, if the vacuum cleaner has

been used to suck up fine dust, such

as plaster, brick dust, cement or flour,

the pores of the dustbag become

blocked very quickly. This affects the

air permeability of the bag and the

marker will indicate that the bag is "full"

even when it is not. If this happens you

must still change the dustbag because

suction power will be greatly reduced

by blocked pores in the dustbag.

If, on the other hand, you have

vacuumed up a lot of hair and carpet

fluff which typically contains a lot of air

the indicator may fail to react even

though the bag is full. You should still

change it!

Both these extremes can occur.