Miele SOUL5 Manuel d'utilisation - Page 28

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Miele SOUL5. Miele SOUL5 44 pages. Cordless vacuum cleaner

Imprimer la page

1. Installation and Connection

Use

Switching on and off

 If you have charged the battery in the

wall bracket, take the vacuum cleaner

out of the wall bracket.

 If you have charged the battery dir-

ectly, unplug the charger from the

charging socket on the bottom of the

battery.

For the best possible cleaning results,

always activate the ComfortClean

function before switching on the va-

cuum cleaner (see "Maintenance – Ac-

tivating the ComfortClean function").

 Press the On/Off switch on the Com-

fort handle .

Selecting the suction power

level

The suction power level can be adjus-

ted for the specific situation. Reducing

the suction power reduces the amount

of effort required to manoeuvre the

Electrobrush.

There are 3 power levels to choose from

on the Comfort handle:

Min.

Lowest power level for light

soiling

Eco

Medium power level for nor-

mal soiling

Max.

Highest power level for

heavy soiling

The floor covering detection function is

activated at every power level.

The Electrobrush power consumption is

automatically set to the optimum level

based on the type of flooring – this can

lead to a change in the operating noise.

Carpet protective function

When the vacuum is at a standstill, the

power of the Electrobrush is reduced

automatically after a few seconds, to

protect the floor surface.

Self-standing function for short

pauses in vacuuming

(For safety reasons, this function can

only be used when the PowerUnit is fit-

ted at the bottom of the vacuum

cleaner)

If you are vacuuming with the

PowerUnit fitted at the bottom of the

vacuum cleaner, you can easily inter-

rupt operation while the appliance is

switched on.

 Swing the vacuum cleaner forwards

until the Electrobrush connector aud-

ibly clicks into place.

The vacuum cleaner stays securely up-

right, the Electrobrush switches itself off

and the battery is conserved.

If you then unlock the connector on the

Electrobrush, the Electrobrush will

switch on again.