Miele STB 201 Manuel d'utilisation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Miele STB 201. Miele STB 201 21 pages. Turbobrush

Imprimer la page

Illustrations

The illustrations referred to in the text

are shown on the fold-out pages at

the end of these operating instruc‐

tions.

Turbobrush features

The Turbobrush is operated by the suc‐

tion power of the vacuum cleaner. It

has a rotating roller brush which is very

effective at picking up thread, hairs and

fluff. Four rollers maintain the brush 1.5

mm away from the floor.

Recommended use



The Turbobrush should not be

used for vacuuming deep-pile rugs

and carpets or valuable hand-knot‐

ted rugs and carpets, e.g. Persian

and oriental rugs etc. There is a dan‐

ger of the threads being pulled out.



Do not use the Turbobrush to

clean highly textured or uneven

floors. The brush might come into

contact with the floor and cause

damage.

The Turbobrush is particularly suitable

for vacuuming thread and hair from cut

pile carpeting.

The standard floorhead or one of the

Miele floorbrushes should be used for

cleaning hard floors.

It is also important to observe the

flooring manufacturer's cleaning and

care instructions.

Using the Turbobrush

 To achieve the best effect, pass the

Turbobrush slowly backwards and

forwards over the carpet or floor co‐

vering.

For carpets with fringes always draw

the Turbobrush from the carpet across

the fringe towards the rest of the floor.

Fitting the Turbobrush

Model STB 205 (dia. 01)

This Turbobrush is intended for use

with Miele vacuum cleaners.

 Instead of the usual floor attachment,

fit the Turbobrush to the suction tube

by twisting it to the left and right. En‐

sure that the locking device engages.

Model STB 201 Vario (dia. 02)

This Turbobrush has an adjustable con‐

nector. It can be used on any suction

tube with a diameter of between 30 and

38 mm. The Turbobrush should, howev‐

er, only be used with the vacuum clean‐

er set to its highest power setting.

Open the air inlet valve (dia. 03)

The brush is operated by the suction

power of the vacuum cleaner. With

deeper, dense pile carpets the roller

brush may rotate more slowly. This is

caused by the carpet pile creating a

seal around the mouth of the Turbo‐

brush and hindering the flow of air. This

will affect how well the carpet is brush‐

ed.

 To increase the airflow, open the air

inlet valve (left hand illustration).