Miele TRIFLEX HX1 Manuel d'utilisation - Page 32

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Miele TRIFLEX HX1. Miele TRIFLEX HX1 40 pages. Cordless stick vacuum cleaner
Également pour Miele TRIFLEX HX1 : Manuel de démarrage rapide (2 pages), Manuel de démarrage rapide (6 pages), Manuel d'utilisation (40 pages), Manuel d'utilisation (48 pages), Manuel de démarrage rapide (2 pages), Manuel de démarrage rapide (2 pages)

Problem solving guide

Many malfunctions and faults that can occur in daily operation can be easily

remedied. Time and money will be saved because a service call will not be

needed.

The following guide may help you to find the reason for a malfunction or a fault,

and to correct it.



Risk of injury caused by rotating roller brush.

You can injure yourself on the rotating roller brush.

Switch the vacuum cleaner off before dealing with any problems. Use the On/

Off switch on the Comfort handle to do this.

Problem

The cleaning perform-

ance is poor.

Cleaning performance

is reduced.

The Electrobrush

switches itself off.

The operating noise is

changing during vacu-

uming.

Cause and remedy

The dust container is full.

 Empty and clean the dust container (see "Mainten-

ance").

The Electrobrush is dirty/blocked.

 Clean the Electrobrush (see "Maintenance –

Cleaning the Electrobrush" and "Removing the

roller brush from the Electrobrush").

The fine dust filter is dirty.

 Clean the fine dust filter (see "Maintenance –

Cleaning the fine dust filter").

The pre-filter is dirty.

 Clean the pre-filter (see "Maintenance – Cleaning

the pre-filter").

The Electrobrush is overloaded – this can happen on

surfaces like deep-pile carpet.

 Switch the vacuum cleaner off and switch it on

again at a reduced suction power level. Use the

On/Off switch on the Comfort handle to do this.

The floor covering detection function is activated in

the medium and highest power levels. The Electro-

brush power output is automatically set to the op-

timum level based on the type of flooring.

 The noise is not unusual – the vacuum cleaner is

functioning normally.