Miele TX2070 Instructions d'utilisation et d'installation - Page 26

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} Miele TX2070. Miele TX2070 44 pages.

Imprimer la page

Cleaning and care

Cleaning the vapour plate and grease

filter in a dishwasher

 Place the vapour plate and the filter

upright or slightly inclined in the lower

basket, with the short sides upright,

ensuring the spray arm is not ob-

structed.

 Use a standard household dish-

washer detergent.

 Select a dishwasher programme with

a wash temperature between 50 °C

and 65 °C.

Depending on the cleaning agent

used, cleaning the filter in a dish-

washer can cause permanent discol-

ouration to internal surfaces of the fil-

ter. However, this will not affect the

functioning of the filter in any way.

After cleaning

 After cleaning, leave the filter to dry

on an absorbent surface before repla-

cing it.

 With the vapour plate and grease fil-

ter removed, clean off any residues of

oil or fat from the now accessible

housing to prevent the risk of these

catching fire.

 Push the grease filter back in as far

as it will go.

 Hook the vapour plate into the bot-

tom of the housing, push it slightly to

the left and then raise it up towards

the appliance and click it into posi-

tion.

Resetting the grease filter operating

hours counter

After cleaning, the operating hours

counter needs to be re-set.

 Press the Grease filter control  for

approximately 3 seconds to reset the

operating hours counter.

The indicator lamp for the grease fil-

ter  will go out.

If you want to clean the grease filter

before the operating hours counter

has reached its maximum:

 Press the Grease filter control  for

approx. 6 seconds.