Miele K 11820 SD Instructions d'utilisation et d'installation - Page 35
Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} Miele K 11820 SD. Miele K 11820 SD 48 pages. Refrigerator with dynamiccooling
Également pour Miele K 11820 SD : Manuel d'utilisation et d'installation (48 pages), Instructions d'utilisation et d'installation (44 pages)
Imprimer la page
Do not operate any appliance which
gives off heat on top of the
refrigerator, e.g. toaster, microwave
oven. Risk of fire!
Side-by-side installation
To avoid a build-up of condensation
and resultant damage, refrigerators and
freezers should not generally be
installed side-by-side.
However, some appliances have
side-wall heating making them suitable
for side-by-side installation with this
refrigerator.
Miele or your Chartered Agent will be
able to advise you on which models
are suitable to being installed
side-by-side
^ Follow the instructions for the other
appliance on how to install the two
appliances side by side.
Location
This appliance should be installed in a
dry, well-ventilated room. It should not
be installed where it is exposed to
direct sunlight or directly adjacent to a
heat-producing appliance such as an
oven or a radiator. The room
temperature should not go above or
below the climate range for which the
appliance is designed. The higher the
ambient temperature of the room, the
more energy the appliance requires to
operate.
Please note the following when
installing the appliance:
– The mains connection socket must
not be located directly behind the
appliance and must be easily
accessible.
– The plug and mains connection
cable must not come into contact
with the rear of the appliance as they
may be damaged by vibrations from
the appliance.
– Nor should other appliances be
plugged into a socket located
directly behind the wine conditioning
unit.
Important! In areas of high humidity,
condensate can build up on the
external surfaces of the appliance.
This condensation can cause
corrosion on the outer walls of the
appliance.
To prevent this happening, it is
recommended that the appliance is
installed in a dry, well-ventilated
room.
After installation, check that the
appliance door closes properly, that
the air inlets and outlets are not
covered, and that the appliance has
been installed as described in these
operating and installation
instructions.
Installation
35