Miele K 12010 S Manuel d'utilisation et d'installation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} Miele K 12010 S. Miele K 12010 S 44 pages.

Imprimer la page

Warning and Safety instructions

Technical safety

Before setting up the appliance,

check it for any externally visible

damage. Do not install and use a

damaged appliance.

If the connection cable is faulty it

must only be replaced by a service

technician authorised by the

manufacturer to protect the user from

danger.

This appliance contains the coolant

Isobutane (R600a), a natural gas which

is environmentally friendly. Although it

is flammable, it does not damage the

ozone layer and does not increase the

greenhouse effect. The use of this

coolant has, however, led to a slight

increase in the noise level of the

appliance. In addition to the noise of

the compressor, you might be able to

hear the coolant flowing around the

system. This is unavoidable, and does

not have any adverse effect on the

performance of the appliance.

Care must be taken during the

transportation and setting up of the

appliance that no parts of the cooling

system are damaged. Leaking coolant

can damage the eyes.

In the event of any damage:

- avoid open fires and anything which

creates a spark,

- disconnect from the mains,

- air the room in which the appliance is

located for several minutes and

- contact the Service Department for

advice.

The more coolant there is in an

appliance, the larger the room it should

be installed in. In the event of a

leakage, if the appliance is in a small

room, there is the danger of

combustible gases building up.

For every 8 g of coolant at least 1 m

room space is required. The amount of

coolant in the appliance is stated on the

data plate inside the appliance.

Safe operation of the appliance is

only assured if it has been installed and

connected in accordance with these

operating and installation instructions.

Before connecting the appliance to

the mains supply, make sure that the

rating on the data plate corresponds to

the voltage and frequency of the

household supply.

This data must correspond in order to

avoid the risk of damage to the

appliance. Consult a qualified

electrician if in any doubt.

Do not connect the appliance to the

mains electricity supply by a

multi-socket unit or an extension lead.

These do not guarantee the required

safety of the appliance (e.g. danger of

overheating).