Miele K 12820 SD edt Manuel d'utilisation et d'installation - Page 34
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} Miele K 12820 SD edt. Miele K 12820 SD edt 40 pages. Refrigerator with dynamiccooling
Également pour Miele K 12820 SD edt : Manuel d'utilisation et d'installation (48 pages), Instructions d'utilisation et d'installation (44 pages), Instructions d'utilisation et d'installation (44 pages), Instructions d'utilisation et d'installation (48 pages)
Imprimer la page
Changing the door hinging
Changing over the door
Make sure the door shelves are
empty!
^ Close the appliance door.
^ Remove cover a by sliding it
forwards from the back and then
lifting it off.
^ Remove cover b by pulling it
upwards.
Caution. The appliance door is not
secure once the hinge plate has
been removed.
^ Loosen screws d in upper hinge
plate c and pull it upwards and off.
^ Carefully lift the door off and place it
to one side.
^ Carefully easy off cover e from
above using a screwdriver and then
take it off together with retaining plate
f.
^ Then separate retaining plate f from
cover e, by pushing it slightly to the
left and then pulling the cover
forwards and off.
34
^ Rotate retaining plate f by 180°.
^ Then fit cover e from the front over
retaining plate f, and slide it over to
the right. The writing must be visible.
^ Remove cover g, then rotate it by
180° and fit it on the opposite side.
^ Then fit cover e together with
retaining plate f on the opposite
side.
^ Remove cap h from the bush in the
door and refit on the opposite side.
^ Remove clamp i from underneath
the door and fit it on the opposite
side.