Miele K 12820 SD edt/cs Instructions d'utilisation et d'installation - Page 11
Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} Miele K 12820 SD edt/cs. Miele K 12820 SD edt/cs 48 pages. Refrigerator with dynamiccooling
Également pour Miele K 12820 SD edt/cs : Instructions d'utilisation et d'installation (44 pages)
Imprimer la page
~
A damaged appliance is dangerous. Check your appliance for
any visible damage. Never install or attempt to use a damaged
appliance.
~
During installation, maintenance and repair work, the appliance
must be disconnected from the mains electricity supply. It is only
completely isolated from the electricity supply when:
– the mains fuse has been disconnected, or
– the screw-out fuse is removed (in countries where this is
applicable), or
– it is switched off at the wall socket and the plug is withdrawn from
the socket, or it is switched off at the isolator.
~
Repairs and other work by unqualified persons could be
dangerous. Installation work and repairs to electrical appliances
must only be carried out by a Miele approved service technician.
~
The manufacturer's warranty will be invalidated if the appliance is
not repaired by a Miele approved service technician.
~
Faulty components must only be replaced by genuine Miele
Original spare parts. The manufacturer can only guarantee the
safety of the appliance when Miele replacement parts are used.
Correct use
~
The appliance is designed for use within a certain climate range
(ambient temperatures), and should not be used outside this range.
The climate range of the appliance is stated on the data plate inside
the appliance. Installing the appliance in a room with too low an
ambient temperature, e.g. a garage, can lead to the appliance
switching off for longer periods so that it cannot maintain the
required temperature.
Warning and Safety instructions
11