Miele K 622 i-1 Instructions d'utilisation et d'installation - Page 28

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} Miele K 622 i-1. Miele K 622 i-1 36 pages.

Imprimer la page

Electrical connection

Electrical connection U.K.

All electrical work should be carried out

by a suitably qualified and competent

person in accordance with local and

national safety regulations.

The appliance is supplied with a mains

cable and moulded plug ready for

connection to an a.c. single phase

220-240 V 50 Hz supply.

The voltage and connected load are

given on the data plate. Please ensure

that these match the household mains

supply. The fuse rating is quoted on the

plug.

Connection should be made via a

suitable switched socket which is easily

accessible. For extra safety it is

advisable to install a residual current

device (RCD) with a trip current of 30

mA (in accordance with DIN VDE 0664,

VDE 0100, Section 739).

Do not connect the appliance to the

mains electricity supply by an extension

lead. Extension leads do not guarantee

the required safety of the appliance

(e.g. danger of overheating).

The appliance must not be connected

to an inverter and must not be used

with a plug adapter as these can cause

damage to the appliance's electronic

unit.

Non-rewireable plugs (BS 1363)

The fuse cover must be re-fitted when

changing the fuse, and if the fuse cover

is lost, the plug must not be used until a

suitable replacement is obtained. The

colour of the correct replacement cover

is that of the coloured insert in the base

of the plug, or the colour that is

embossed in words in the base of the

plug (as applicable to the design of the

plug fitted).

Replacement fuses should be ASTA

approved to BS 1362 and have the

correct rating. Replacement fuses and

fuse covers may be purchased from

your local electrical supplier.

WARNING

THIS APPLIANCE MUST BE

EARTHED