Allnet ALL0279DSL Manuel d'installation rapide - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Allnet ALL0279DSL. Allnet ALL0279DSL 7 pages. 802.11g / 802.11b wireless access point adsl modem nat router wps 4-port switching hub

Imprimer la page

Macintosh Setup

1. Open the TCP/IP Control Panel.

2. Select Ethernet from the Connect via pop-up menu.

3. Select Using DHCP Server from the Configure pop-up

menu. The DHCP Client ID field can be left blank.

4. Close the TCP/IP panel, saving your settings.

If using manually assigned IP addresses instead of DHCP, the

required changes are:

• Set the Router Address to the Wireless ADSL Router's IP

Address.

• Ensure your DNS settings are correct.

Linux Setup using X Windows

Follow this procedure to set your system to act as a DHCP

client and obtain an IP Address from the Wireless ADSL

Router:

1. Start your X Windows client.

2. Select Control Panel - Network

3. Select the "Interface" entry for your Network card. Nor-

mally, this will be called "eth0".

4. Click the Edit button, set the "protocol" to "DHCP", and

save this data.

5. To apply your changes

• Use the "Deactivate" and "Activate" buttons

• OR, restart your system.

Page 5