Miele KT 2211 S Instructions d'utilisation et d'installation - Page 25
Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} Miele KT 2211 S. Miele KT 2211 S 40 pages.
Imprimer la page
Never use cleaning agents
containing abrasive substances
such as sand, soda, acids or
chemical solvents.
"Non-abrasive" cleaning agents are
also unsuitable as they can cause
matt areas to appear.
Do not let water get into the
temperature selector, the light or the
ventilation gaps.
Do not let water get into the
drainage channel and drain hole
when cleaning.
Never use steam cleaning
apparatus to defrost or clean the
appliance. Steam could reach the
electrical components and cause a
short circuit.
The data plate located inside the
appliance must not be removed. It
contains information which is
required in the event of a service
call.
Before cleaning
^ Switch the appliance off by turning
the temperature selector to "0" and
then switching off at the socket and
removing the plug.
^ Take any food out of the appliance
and store it in a cool place.
^ Defrost the freezer section.
^ Take out any removable parts, e.g.
shelves, for cleaning.
Cleaning and care
Cleaning the outer casing, the
interior and accessories
^ Clean the refrigerator section at least
once a month and the freezer section
each time it is defrosted. Use warm
water with a little washing up liquid.
^ Accessories and shelves should all
be hand-washed only.
^ Clean the condensate channel and
drain hole frequently, so that
condensate can drain away
unhindered. Use a straw or similar to
clear the drain if necessary.
^ After cleaning wipe the outer casing,
interior and accessories with a damp
cloth and dry with a soft cloth. Leave
the doors open to air the appliance
for a short while.
E-Cloth
^ A microfibre "E-Cloth" is available
from the Miele UK Spare Parts
Department, which is suitable for
cleaning surfaces such as stainless
steel, glass, plastic and chrome
without the use of chemicals.
Ventilation gaps
^ The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner. A build up
of dust will increase the energy
consumption of the appliance.
25