Allnet ALL 1693 Manuel d'installation rapide - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Allnet ALL 1693. Allnet ALL 1693 7 pages. 56 mbps powerline ethernet adapter

Imprimer la page
Product installation guide
Important:
Do not plug the device into a power strip or surge protector because these devices may consist of
filter and impair signal. Also avoid plugging the device right next to noisy sources such as cell
phone charger, Halogen light, noisy desktop computer, vacuum cleaner, etc. Both cases result in
poor transmission speed.
To install for the PC local PowerLine network
1.
Use the supplied Category 5 Ethernet cable to connect the ALL1693 and your PC's Ethernet port.
2.
Plug the Ethernet Bridge ALL1693 to outlet.
3.
You can repeat steps 1 and 2 for connecting many other links depending on your needs
4.
The LINK LED indicator light up when you complete the above connection.
5.
The ACT LED indicator starts blinking when the data communication proceeds on power line.
To share a xDSL or cable modem with Internet access service
1.
Connect one ALL1693 to the broadband router
Plug the ALL1693 into an AC outlet.
Plug the provided Ethernet cable into the RJ45 connector of the ALL1693 and plug the other end of the
cable into an available Ethernet port of the Router.
2.
Connect the other ALL1693s to the PC(s) to share the Internet access
Plug the Bridge ALL1693 into an AC outlet.
Plug the provided Ethernet cable into the RJ45 connector of the Bridge ALL1693 and plug the other
end of the cable into Ethernet port on the PC.
As wireless AP (Access Point) Extender
1.
Connect one Ethernet Bridge ALL1693 to the broadband router
Plug the ALL1693 into an AC outlet.
Plug the provided Ethernet cable into the RJ45 connector of the Bridge ALL1693 and plug the other
end of the cable into an available Ethernet port of the Router.
2.
Connect the other Ethernet Bridge ALL1693 to the AP
Plug the BridgeALL1693 into an AC outlet.
Plug the provided Ethernet cable into the RJ45 connector of the Bridge ALL1693 and plug the other
end of the cable into the Ethernet port on the AP.
ALL1693
© 2005 All rights reserved.
.
Page 6