Allnet ALL168205Mini Manuel de démarrage facile - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage facile pour {nom_de_la_catégorie} Allnet ALL168205Mini. Allnet ALL168205Mini 2 pages. 200mbit powerline mini adapter
Imprimer la page
Easy Start Guide
ALL168205Mini Overview
Power LED
OFF
- No Power.
ON
- After Simple Connect is pressed for two seconds, this LED
will blink to con rm the button is pressed.
- When Simple Connect is pressed for at least 10 seconds,
this LED will blink to con rm the Private Network Name
is reset.
Powerline LED
OFF
- Device is not connected to a HomePlug AV network.
ON
- This LED remains on when the device is part of a
HomePlug AV network.
- The LED colors represents the connection rate within
the HomePlug AV network whether it is bad (red),
good (amber), or excellent (green).
- The LED ashes to indicate network activity.
Ethernet LED
OFF
- An Ethernet device is not connected.
ON
- An Ethernet device is connected.
- The LED ashes to indicate Ethernet activity.
ALL168205Mini 200Mbit Powerline Mini Adapter
Ethernet Ports
This is where you connect your Ethernet devices. (10/100 Mbit)
Connect-Button
- Press for 2 seconds to initiate pairing.
- Press for 10 seconds to randomize the private network name.
For more refer to the manual
Reset-Button
Press for 3 seconds to restore factory defaults.
Setup Diagram
ALL168205Mini
Internet
Modem/Router
Room 1
1.
In Room 1 plug the ALL168205Mini into the power socket.
Connect it to your Modem/Router's Ethernet LAN port with an Ethernet cable.
2.
In Room 2 plug also the ALL168205Mini into the power socket.
Connect it to your computer's Ethernet port with an Ethernet cable.
3.
The lighting Powerline LED on the ALL168205Mini in Room 2 shows that the device is
connected to the Powerline device in Room 1. Your ALL168205Mini is now ready for use.
You may now access the Internet.
ALL168205Mini with AC Passthrough is compatible with other Homeplug AV Standard.
Powerline
Powerline
ALL168205Mini
Computer
Room 2