Miele KM 6208 Manuel d'instructions d'installation - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Miele KM 6208. Miele KM 6208 28 pages. Ceramic hobs

Imprimer la page

Hob with frame or bevelled edge

Installation

The exact positions of the spring

clamps and the safety brackets (only

for hobs with bevelled edge) are

shown in the building-in dimensions

for the particular hob.

Hobs with bevelled edge:

The sealing strip will ensure that the

hob sits securely in the cut-out. Any

gap between the frame and worktop

will reduce with time.

^ Make the worktop cut-out according

to the dimensions given in the

building-in dimensions. Remember to

maintain the minimum safety

disances (see "Safety instructions for

installation").

Worktops made of wood

^ Seal the cut surfaces with a suitable

heat-resistant sealant to avoid

swelling caused by moisture.

Make sure that the sealant does not

come into contact with the top of the

worktop.

^ Place the spring clamps and the

safety brackets (only for hobs with

bevelled edge) (supplied) on the

upper edge on or at the upper edge

of the cut-out.

^ Secure the spring clamps a and

safety brackets b using the

3.5 x 25 mm wood screws supplied.