365SMART SM-06-02030G Manuel original - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel original pour {nom_de_la_catégorie} 365SMART SM-06-02030G. 365SMART SM-06-02030G 20 pages. Cross line laser cube

Imprimer la page

WARRANTY

Provides a warranty for correct operation of the tool.

The warranty period begins from the date of han-

ding over to the user and lasts 12 months, while the

consumer warranty (purchase with receipt) lasts 24

months.

All faults resulting from manufacturing or material

defects are covered with free repairs.

The warranty does not cover defects resulting from

mechanical damages caused by the user, misuse,

incorrect maintenance, use of incorrect accessories

and defects resulting from overloading of the device.

The warranty is valid if the tool is delivered to the

service center without any modifications, with

warranty card stamped and signed by the point

of sale, with entered index and serial number, with

description of the defects, data of purchaser and proof

of purchase in form of the receipt or copy of the invo-

ice (with the same dale of sale as in the warranty card).

Erpatech. agrees to repair the device within 14 days

from the date of delivery to the service center.

All costs related to the provision of safe packaging,

insurance and against other risks shall be borne by

the Customer.

The Service may decide to replace the device with

a new one (complete or in part) if it is not possible

to remove the defect or due to the high costs of

such repair. If the same product is not achievable,

then it may be required to deliver new product,

with parameters which are not worse then the

original.

Decision of the warranty service concerning the

justness of notified defects is final.

The warranty does not cover:

• malfunction or damages caused by misuse or

improper use not conforming the service manual

or safety regulations;

• malfunction or damages caused by overloading

of the tool leading to damages of motor, trans-

mission or the other components and by use of

the other equipment that recommended;

• mechanical damages of the product and defects

caused by them;

• malfunction or damages caused as a result of fire,

flood or other natural disasters, corrosion or other

external impacts;

• products with damaged warranty seals or repa-

ired by the third party service centers or modified

in any other way;

• consumable equipment included in the device

such as: drill bits, disks, screwdriver bits, tips, kni-

ves for planers, blades, abrasive paper and other

components subject to wear and tear.