ALLNIC AUDIO T-2000 Manuel du propriétaire - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} ALLNIC AUDIO T-2000. ALLNIC AUDIO T-2000 17 pages. 30th anniversary stereo integrated amplifier
Également pour ALLNIC AUDIO T-2000 : Manuel du propriétaire (11 pages)
Imprimer la page
• As are all Allnic Audio products, the T-2000 30th Anniversary is fully RoHS (EU Reduction of Hazardous
Substances regulation) compliant in construction and materials.
WHAT'S IN THE BOX?
Please check that the shipping box contains the following:
• One (1) Allnic T-2000 30th Anniversary stereo integrated amplifier
• One (1) Allnic remote control
• One (1) Allen wrench for screws on top of the tube chimneys
• One (1) 15 Amp IEC type power cord
• One (1) Owner's Manual
Note:
1)
The T-2000 30th Anniversary ships with the tubes installed.
2)
The T-2000 30th Anniversary will work with most IEC type aftermarket power cords. The Allnic
ZL-3000 and ZL-5000 power cables will make an excellent match. Of course, only you can
determine the power cord that works most synergistically with the T-2000 30th Anniversary in
your system.
3)
Be sure the T-2000 30
NOT connect it to your AC outlet. Please contact your Allnic dealer.
We advise that you keep the boxes and other packing materials that your T-2000 30th Anniversary
came in. It will be useful if you sell your T-2000 30th Anniversary or in the unlikely event you need to
ship it for service.
SAFETY
• Remove ALL protective cushioning material (cardboard around tubes) inside the tube
chimneys before operation. The tube chimneys should contain NOTHING except the tubes.
• Disconnect the power cord by pulling the plug, not the cable.
• Do not attempt any repairs. Do not remove the unit's chassis cover without specific
authorization from your Allnic Audio dealer.
• Keep the power cord away from heat sources.
• Keep the unit away from liquids – do not allow any liquid to enter the interior of the unit.
• When the unit is moved from a cold to a warm environment, allow sufficient time for any
condensation to evaporate before plugging the T-2000 30th Anniversary into an AC connection.
• Do not attempt any repairs.
• See the notes on "Location, Location, Location".
th
Anniversary is set for the AC voltage of your location. If it is not, DO
6