Dialight Vigilant Manuel d'installation et d'utilisation - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Dialight Vigilant. Dialight Vigilant 11 pages. Area light with battery backup
Également pour Dialight Vigilant : Instructions d'utilisation et d'installation (6 pages)
Closing Luminaire
Torque:
1st = 1 N-m (8.8 in-lb)
Battery Backup Connection
Battery Pack is only charged during AC operation
Once AC power is lost, BATTERY MODE is enabled and will stay on based on the configuration jumper position
(Fig.A) below.
BATTERY LIFE: The battery pack should be replaced every 3 years
ATTENTION: Luminaire requires a minimum of 24 continuous hours of normal operation before the batteries are fully
charged. If AC power is interrupted, then the 24 hour clock restarts.
SELF-TESTING: The Luminaire performs 3 tests automatically and at random times:
Install Duration Test
Function Test
Annual Duration Test
GREEN LIGHT = Indicates NORMAL status
Refer to table to identify meaning of flashing lights. Mark battery with date of install.
Page: 6 of 11
Vigilant® Bulkhead
M20 Torque:
2.3-2.7 N-m (20-24 in-lb)
3/4 NPT Torque:
4.7-5.2 N-m (42-46 in-lb)
FINAL = 5 N-m (44.2 in-lb)
runs a duration test after 24 continuous hours of normal operation, the light will go into
BATTERY MODE based on the configuration jumper
will be performed monthly, light will remain in normal operation during test
runs a duration test after 24 continuous hours of normal operation, the light will go into
BATTERY MODE based on the configuration jumper
After illumination confirmation, tuck excess cable into
luminaire
Tighten cord grip to secure cable
Ensure O-ring is in place and not damaged
CAUTION: Ensure cables will not be pinched
Tighten corner captive screws
RED LIGHT = Indicates SYSTEM FAULT status
Dialight, 1501 Route 34 South, Farmingdale, NJ 07727 USA
Tel: +1 732.919.3119
(opposite corner sequence)
Document # 9100127225199 / Rv.D 79747
Fax: +1 732.751.5778
www.dialight.com