Allo RemoteControl NICE TT1N Instructions - Page 2
Parcourez en ligne ou téléchargez le pdf Instructions pour {nom_de_la_catégorie} Allo RemoteControl NICE TT1N. Allo RemoteControl NICE TT1N 3 pages.
Imprimer la page
Memory deletion:
1. Switch the control unit off and cut the jumper on the weld side of the card
2. Power the control unit and wait for the initial beeps
3. Press and hold down button ■ of a previously memorized transmitter until you hear a beep (after
about 5 seconds) then release it
4. Press and hold down button ▲ of the transmitter until you hear 3 beeps; release button ▲
exactly during the third beep.
5. Press and hold down button ■ of the transmitter until you hear 3 beeps; release button ■
exactly during the third beep
6. Press and hold down button ▼ of the transmitter until you hear 3 beeps; release button ▼
exactly during the third beep
7. If you wish to delete all the data in the memory, press the ▼ ▲ keys simultaneously within 2
seconds until you hear the first of 5 beeps, then release them
N.B. 5 beeps will sound, indicating that all the codes in the memory have been deleted
Visit our website: www.Alloremotecontrol.com