Allo.com PSTN / VoIP PBX Manuel d'installation rapide - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Allo.com PSTN / VoIP PBX. Allo.com PSTN / VoIP PBX 11 pages.

Imprimer la page

PSTN/VoIP PBX

PSTN/VOIP PBX Quick Installation

Wizard

By following the Wizard, you will create a very basic configuration file allowing you to

make and receive calls thus confirming your PSTN/VOIP PBX is fully functional.

Most of the features won't be visible until you complete the wizard and access the

full fledge user interface.

After the completion of Quick setup wizard, PSTN/VOIP PBX will reboot and launch

the basic configuration file you've created. You are ready to test! You will also have

access to the full fledge user interface and all the features offered.

Once the reboot is done, Connect the WAN port of the PSTN/VoIP PBX to your

network switch ,also you can remove the LAN connection and use the WAN IP to

access the Full Fledge User Interface of the PSTN/VOIP PBX. The WAN IP address

can be obtained by dialing **# from the Analog phone which is connected to the

PSTN/VoIP PBX

Important Note:

We strongly recommend you to access the PSTN/VoIP PBX webGUI after completion of

Quick setup wizard through WAN IP address. LAN interface only for initial setup.

Make sure to add the port number 8088 at the end of your IP address when logging in.

For Eg: 192.168.0.42:8088

The WAN IP address can be obtained by dialing **# from the Analog phone which is

connected to the PSTN/VoIP PBX

Quick Installation Guide v2.1