Allo.com 2nd Gen E1/T1/J1 Manuel d'installation rapide - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Allo.com 2nd Gen E1/T1/J1. Allo.com 2nd Gen E1/T1/J1 8 pages. Pri card

Imprimer la page

Generation E1/T1 PRI Card Installation

Hardware Setup

1) Customization of the Second gen PRI card to use in PCI / PCIe server slot.

2) Insert the Second Gen 4 port PRI (PCI/PCIe) card in the corresponding PCI/PCIe slot

of the Server.

3) Check if the installed PRI card is detected using the below command

# lspci

If the card has been recognized, it will be displayed in the output information.

Note: If the PRI card is not recognized by the system, you have to power off and

take out the card, and then insert it into another PCI-E slot.

Quick Installation Guide v1.0