ABB ACQ580-01 Series Manuel d'installation et de démarrage rapide - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et de démarrage rapide pour {nom_de_la_catégorie} ABB ACQ580-01 Series. ABB ACQ580-01 Series 17 pages. Ul type 4x (ip66) drives, nec types
Également pour ABB ACQ580-01 Series : Manuel (16 pages), Manuel d'installation et de démarrage rapide (16 pages), Manuel d'installation et de démarrage rapide (17 pages)

12. Connect the control cables

Make the connections according to the application. Keep the signal wire pairs twisted as near to the terminals as possible

to prevent inductive coupling.

Cut a hole into the rubber grommet and slide the grommet onto the cable.

Ground the outer shield of the cable 360° under the grounding clamp. Keep the cable unstripped as close to the

terminals of the control unit as possible. Ground also the pair-cable shields and grounding wire at the SCR terminal.

Tie all control cables to the provided cable tie mounts.



Default I/O connections (Water default)

Total load capacity of the auxiliary voltage output +24V (X2:10) is 6.0 W (250 mA / 24 V DC).

Terminals

+24V, DGND, DCOM, B+, A-, DGND, Ext. 24V

DI, AI, AO, AGND, RO, OUT, IN, SGND

R6... R9 only: Ext 24V AC/DC input to power up the

control unit when the main supply is disconnected.

Wire size

0.2 ... 2.5 mm

(24 ... 14 AWG)

0.14 ... 1.5 mm

(26 ... 16 AWG)

Tightening torque

0.5 ... 0.6 N·m (5 lbf·in)