Dialighting IW19-10 ZOOM Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dialighting IW19-10 ZOOM. Dialighting IW19-10 ZOOM 20 pages.

Imprimer la page

Linear: The increase in light intensity appears to be linear as DMX value is increased.

Square Law: Light intensity control is finer at low levels and coarser at high levels.

Inverse Square Law: Light intensity control is coarser at low levels and finger at high levels.

S-cure: Light intensity control is finger at low levels and high levels and coarser at medium levels.

Dimmer Speed

To select Dimmer Speed, press the ENTER button to show the DIMMER SPEED on the

display. Use the UP/DOWN button to select Fast or Smooth. Once selected, press the ENTER

button to setup. Press the MENU button back to the last menu or let the unit idle one minute to

exit menu mode.

Display Setting

Enter MENU mode, select Display Setting, press the ENTER button to confirm, use the UP/DOWN

button to select Display Inverse, Backlight Auto Off, Backlight Intensity ,Temperature unit or

Display Warning.

Display Inverse

To select Display Inverse, press the ENTER button to show the DISPLAY INVERSE on the

display. Use the UP/DOWN button to select No (normal) or Yes (display inverse). Once selected,

press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle

one minute to exit menu mode.

Backlight Auto Off

To select Backlight Auto Off, press the ENTER button to show the BACKLIGHT AUTO OFF on

the display. Use the UP/DOWN button to select No (display always on) or Yes (display goes off one

minute after exiting menu mode). Once selected, press the ENTER button to confirm and store.

Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

Backlight Intensity

To select Backlight Intensity, press the ENTER button to show the BACKLIGHT INTENSITY on

the display. Use the UP/DOWN button to adjust the intensity from 1 (dark) to 10 (bright). Once

selected, press the ENTER button to setup and store. Press the MENU button back to the last

menu or let the unit idle one minute to exit menu mode.