Allo.com 4aCP4e Manuel d'installation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Allo.com 4aCP4e. Allo.com 4aCP4e 14 pages. Digital card

Allo E1/T1 PRI Card Quick Installation Guide

1.5 PRI Card LED Indications

Red LED Rolling/Moving : When Dahdi is not loaded

Red LED Blinking

Green LED ON

1. Now that you are acquainted with the ALLO PRI cards, power down your computer

and unplug it from its power source.

2. Attach a static strap to your wrist and open the case.

3. Take away the section place holder and addition the card into a PCI Express Slot.

4. Plug the T1 or E1 equipment cable into the RJ45 port.

Use only shield cables to ensure compliance with the international EMC standards.

www.allo.com

: When Dahdi is loaded

: When PRI lines are connected

Insert Card

Version 2.1