Alloy POE120 Series Manuel du produit - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel du produit pour {nom_de_la_catégorie} Alloy POE120 Series. Alloy POE120 Series 9 pages. 10/100 base-tx to 100base-fx converter poe powered device

Imprimer la page

1. Overview

The POE120 Series IEEE 802.3u compliant media converters support two

types of media 10/100 Base-TX and 100Base-FX. With LFP (Link Fault

Propagation) support it allows the administrator to easily diagnose link faults

on their network. If the Copper or Fibre link fails, the converter forces the link

status of the connecting device to also fail.

The POE120 Series media converters are fully compliant to the IEEE 802.3af

standard. The converters advanced auto-sensing algorithm allows the unit to

draw power from any IEEE 802.3af Power Sourcing Equipment (PSE) device

(POE100 Series Converter, or PoE Switch) or Power over Ethernet Injector. It

also supports high levels of safety support with short circuit protection and

power-in auto-detection. The POE120 series converters can be powered from

either a standard plug pack or a PSE device.

2. Model Description

Model

POE120 Series

100Mbps Fibre Transceiver

ST/SC Multimode 2Km

SC.S05/S20/S40/S60Km Single Mode

SC.S80/S100Km Single Mode

Single Fibre Model

1310nm Single Mode 20Km

1550nm Single Mode 20Km

Note:

The 1310nm and 1550nm models must be installed in pairs,

i.e., install 1310nm model at one end and the 1550nm model at the other end.

3. Checklist

Before you start installing the POE converter, please verify that the package

contains the following items.

The POE120 Series Converter

CD containing this manual

Please notify your sales representative if any of the above items are missing

or damaged.

Power Description

60mA@-48VDC over Cat.5

TX, RX Wavelength

TX (Transmit) 1310nm

RX (Receive) 1550nm

TX (Transmit) 1550nm

RX (Receive) 1310nm

Wavelength

1310nm

1550nm