Dialog4 Sountainer Manuel - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Dialog4 Sountainer. Dialog4 Sountainer 12 pages. Sountainer v1.0c

Imprimer la page

Important Information

Before undertaking an up/download set the unit to the STOP mode.

SOUNTAINER

Should the

not be automatically switched off after a

software update, remove the batteries and insert once again.

During data transfer, the display on the PC monitor is not updated

continously. This only takes place after the download has been suc-

cessfully completed.

We recommend using only rechargeable batteries as these have a

larger capacity than alkali batteries. The playback time is largely

dependent on the type of battery:

REC with modern alkali batteries

PLAY with modern alkali batteries

REC with NiMH 1600 mAh rechargeables approx. 3 – 4 hours

PLAY with NiMH 1600 mAh rechargeables approx. 6 – 8 hours

Use only MMCs from SanDisk! The length of recording/play time is

dependent on the bitrate:

64 MB REC Capacity =

The maximum number of recordings per MMC is 255 tracks.

approx. 1 hour

approx. 8 hours

65 min. CD Quality

88 min. FM Quality

130 min. Long Play

260 min. Voice Recording

System... with the following options:

Info

Here the current software version and the battery power supply is

interrogated. Leave this menu item with the ESC/Exit button.

Set Defaults

After confirming the safety query with the OK button, all of the

settings which you have made are replaced by the original values ex-

factory.

SW Update (MMC)

Here the software update from a MMC is started.

Please note: Do not switch the unit off during the update procedure!

An unsuccessful update is displayed with the message "BOOT ER-

ROR". A renewed update is only possible using the PC software

(please see page 21).

Backlight AUTO (setting ex-factory)

Here you have the possibility to set the display backlight to either

ON, OFF or AUTO, using the volume buttons. When set to AUTO, the

backlight is switched on for 20 seconds after any button has been

pressed. Confirm your selection with the OK button.

Del: <Track Name>

Selecte a track to be deleted and confirm with the OK button.