AllPondSolutions EF1+ Manuel - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} AllPondSolutions EF1+. AllPondSolutions EF1+ 20 pages. Aquarium external filters
The power cable must have a drop loop to avoid
any condensation build up reaching the mains
(see diagram 1). If the plug does get wet, DO
NOT unplug the cord. Disconnect the fuse or
circuit breaker that supplies power to the
appliance. Then unplug and examine for
presence of water in receptacle.
Carefully examine your filter after installation. Do not
plug in the unit to the mains if there is water on any
parts not intended to be wet.
If the unit shows any signs of water leakage,
disconnect the power supply cord from the wall
socket and consult All Pond Solutions or the
retailer you purchased this unit from for further
advice.
If the plug or unit does get wet, DON'T unplug the cord. First, disconnect the circuit
breaker or fuse that supplies power to the appliance. Next, unplug and inspect
for water presence in the receptacle.
To avoid injury, do not touch hot or moving parts such as, but not limited to, heaters,
reflectors, UV bulbs or impellers.
Please note – this appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of experience and
knowledge, provided they are given supervision and instruction concerning use of
the appliance and understand the hazards involved. Children must not play with the
appliance. Any maintenance must not be made by children without supervision.