AllPondSolutions SKIM-2 Manuel - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} AllPondSolutions SKIM-2. AllPondSolutions SKIM-2 8 pages. Aquarium surface skimmer
Imprimer la page
TROUBLESHOOTING
No Or Even Low Water Flow
Check the SKIM-2 is plugged in and has power.
1
The surface strainer must be positioned so it can float
2
up and down on the surface level and intake water.
Clean the filter floss as this may be blocked.
3
Visually check the impeller area from the top. The filter
4
floss should stop any large debris entering this area,
but in case it has, remove it.
Motor Shows No Power
Check the SKIM-2 is plugged in and has power.
1
Visually check the impeller area from the top. The filter
2
floss should stop any large debris entering this area,
but in case it has, remove it.
Excessive Noise
Visually check the impeller area from the top. The filter
1
floss should stop any large debris entering this area,
but in case it has, remove it.
Turn down the venturi air intake by turning the venture
2
adjuster.
Still have issues?
Contact the retailer you purchased this All Pond Solutions
product from for further assistance.