ABB AFS670 Consignes de sécurité - Page 13

Parcourez en ligne ou téléchargez le pdf Consignes de sécurité pour {nom_de_la_catégorie} ABB AFS670. ABB AFS670 18 pages. Precautions and safety, equipment handling advices

Imprimer la page

AFS670 | PRECAUTIONS AND SAFETY

NOTICE

2019-04-30

Non-observance could result in equipment damage.

Electronic equipment is sensitive to strong electromagnetic fields and may

show unexpected behavior when exposed to fields above the specified level.

→ Select an installation place with sufficient distance to equipment that pro-

duces strong electromagnetic fields (e.g. large transformers, power rectifi-

ers, generators, electrical machines, railways etc.).

Non-observance could result in equipment damage.

The equipment has to be installed according to the instructions given in the

Installation Instruction provided in the user documentation.

→ Refer to

[EN-1KHW028954] User Manual "Installation AFS670 Version

→ The equipment has to be commissioned according to the instructions

given in the user documentation.

Non-observance could result in equipment damage.

When switching off the power supply data transmission will be interrupted.

→ If possible postpone maintenance to periods with very little traffic.

Non-observance could result in equipment damage.

When the equipment is brought from a cold to a warm environment, this may

lead to condensation. Operation of the equipment during condensation is not

permitted.

→ Equipment with condensation must be dried before taking it into opera-

tion.

Non-observance could result in equipment damage.

In case of a repair only original spare parts may be used. Other spare parts are

only permitted if this does not affect the safety of the equipment.

Non-observance could result in equipment damage.

Excessive bending and ignoring the minimum bending radius damages opti-

cal fibers.

→ Do not bend or press optical fibers.

→ Always keep at least the minimum bending radius.

→ Special optical fibers allow a bending radius of 15 mm.

Non-observance could result in equipment damage.

In order to preserve the specified EMC characteristics of the equipment it is

essential to adhere to the following rules:

→ Do not modify the ferrite filters provided with the cables.

→ Ensure that all 3

party equipment which is installed near to the equip-

ment is compatible with the EMC and safety standards.

SAFETY ADVICES

2.0".