Miller AA40GB w/OCP Manuel du propriétaire - Page 18
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Miller AA40GB w/OCP. Miller AA40GB w/OCP 24 pages.
Également pour Miller AA40GB w/OCP : Manuel du propriétaire (28 pages)
Imprimer la page
4-3. Troubleshooting
Trouble
Electrode wire feeding stops or feeds er-
ratically during welding.
ratically during welding
Motor runs slowly.
Motor runs at full speed regardless of
wire speed setting.
SECTION 5 − ELECTRICAL DIAGRAM
Figure 5-1. Circuit Diagram For AA-40GR/Gas Box (Left Hand)
OM-223 426 Page 14
Readjust hub tension and drive roll pressure.
Change to correct size drive roll.
Clean or replace dirty or worn drive roll.
Incorrect size or worn wire guides.
Replace contact tip or liner. See gun Owner's Manual.
Remove weld spatter or foreign matter from around gun nozzle opening.
Check and secure motor plug connection.
Have Factory Authorized Service Agent check drive motor.
Reduce load.
Check for correct input voltage.
Have Factory Authorized Service Agent check digital wire drive motor Tachometer board and encoder.
Remedy
221 660-A