Miller Copilot Manuel du propriétaire - Page 36
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Miller Copilot. Miller Copilot 48 pages. Collaborative welding system
Imprimer la page
The cobot system is operated from the front of the system using the operator station push buttons. In most cases welding operation only requires
the operator to load a part to be welded, press the "start" push button.
All personnel that will be operating the system must be familiar with the safety features of the system and know how to stop the
cobot in the case of an emergency.
8-1.
Powering Up The System
1
8-2.
Logging In To The System
When you power up the system, you automatically be logged in as an Operator. The Operator level does not require a password. If you need to
change default settings, log in as an Administrator. See the Manipulator Owner's Manual.
8-3.
System Settings
A cobot system has many settings that are configured when the system is assembled. Most are one-time settings that will never need to be
changed for the life of the system. This section introduces a few key concepts for basic setup and operation. This is not a comprehensive list of
all the settings that each system has. Refer to the Manipulator Owner's Manual for more detailed information.
You can view these settings when you are logged in as an Operator.
You can change some settings not related to safety if you are logged in as an Administrator.
OM-291865 Page 32
SECTION 8 – OPERATION
3
4
1 Turn On disconnect power switch.
2 Turn On welder power switch.
3 Turn On cobot controller switch.
5
2
4 Wait until cobot standby light is On.
5 Turn On teach pendant power switch.