Diametral VirBuster 8000 E Manuel - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Diametral VirBuster 8000 E. Diametral VirBuster 8000 E 12 pages.
Imprimer la pageVirBuster
Switch on the device and disinfect the rooms
SAFETY WARNINGS
There must be no people, animals or plants in the disinfected room!
VirBuster 4000A, VirBuster 8000A, VirBuster 10000A and VirBuster
20000A models
Make sure that there are no people, animals or plants in the disinfected room!
Close all windows and doors in the disinfected room.
Hang a security tag on the outer door handle of the disinfected room.
Set the timer (3) according to the table in the chapter: "Recommended times and
outputs".
Turn on the main switch (1) and leave the disinfected room immediately!
The main switch (1) lights up to indicate that the device is switched on and the indicator
light for the ozone formation process (2)
Make a note of the start time of the disinfection process to give you an idea of when the
device will switch off.
At the end of the set time for the disinfection process, the ozone formation indicator light
(2) goes out. Wait at least 90 minutes before entering the room!
Then ventilate the disinfected room intensively and thoroughly for at least 1 hour!
Switch off the device with the main switch (1).
Models VirBuster 4000E VirBuster 8000E VirBuster 10000E and
VirBuster 20000E
Make sure that there are no people, animals or plants in the disinfected room!
Close all windows and doors in the disinfected room.
Hang a security tag on the outer door handle of the disinfected room.
Turn on the main power switch ( 1 ).
Set the timer ( 5 ) according to the table in the chapter Recommended times and
outputs.
Start the countdown for the disinfection process with the button ( 6 ) and leave the
disinfected room immediately!
The LED stripe at ( 4 ) shows the remaining time of the disinfection process
in percent. When the disinfection process is completed, no lights up on the LED stripe (4)
and an acoustic signal will sounds.
6