Miller ArcStation Manuel du propriétaire - Page 16
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Miller ArcStation. Miller ArcStation 20 pages.
Également pour Miller ArcStation : Manuel du propriétaire (44 pages)
Imprimer la page
3-11. Installing Caster Assembly
Tools Needed:
1/2 in.
hex bit 5/16 in.
OM-247318 Page 12
.
The 30S and 30SX welding table cannot
use caster mounts with an external shelf.
Remove external shelf before installing
caster mounts.
2
BB and ZZ
Replace adjusting
bolt LL (4 places)
1
250258
. . .
250259
. . .
.
Casters are only for moving ta-
ble. Do not work on table with
casters extended.
.
If the leveling foot mounting bolt
is installed on the outside hole,
remove and install on the inside
hole.
.
Be sure that swivel casters are
both mounted on the same side
of table.
1
Caster Assembly
2
Adjusting Bolt LL
Use supplied socket and extension
with a drill to remove adjusting
bolt LL before installing caster
assembly.
Use supplied bolt BB and nut ZZ,
and install caster mount to leg of
end subframe.
Install swivel casters on same side
of table. Install stationary casters
on opposite end of table in the same
manner.
Replace adjusting bolts and raise
table onto casters.
Move table to desired location.
Lower table so that casters do not
contact the floor and leveling feet
are firmly touching the floor.
If table is not level, see table
Owner's
Manual
for
leveling
procedure.
Parts List
Caster, swvl
. . . . . . . . . . . . . . .
Caster, sta
. . . . . . . . . . . . . . . .
2
2