Miller 1055 Manuel de l'opérateur - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} Miller 1055. Miller 1055 17 pages. Fluid head

4.4 Using a 3 mm Hex key unlock the LOCK SCREW (fig. 6),

then using a broad flat screw driver turn the ADJUSTING

SCREW (fig. 6) in the direction shown by 1/8 of a turn

and re-check step 4.2, repeat 4.4 if necessary. When

adjusted correctly, the SIDE LOAD LOCK LEVER will be

smooth to operate and require modest effort to lock the

CAMERA PLATE.

4.5 Once the correct adjustment is achieved, remove the

CAMERA PLATE and lock the LOCK SCREW.

Camera Plate

Turn Adjustment Screw

Counterclockwise to

compensate for a wider

camera plate.

Correct position of Side

Load Lock Lever at the

start of locking action.

Turn Adjustment Screw

Clockwise to compensate

for a narrower camera plate.

Fig. 9