AquaOne CET-15000 Manuel d'instruction - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} AquaOne CET-15000. AquaOne CET-15000 15 pages. Variable frequency pump with control

Imprimer la page

3. Centrifugal impeller design,improve the H-max and output.

4. Super slience ,can be used both in fresh and sea water.

5. Novel design and generous,rotary handle ,easy to carry.

6. Rotary feet,can work vertical or horizontal.

7. Use ceramic shaft, wear resistance, no rust.

8. Long service life, no copper element.

9. The outlet realize multistage over,suitable for a variety of pipe diameter

connection.

10.

Separation of electric drive,more safe and stable.

11.

The external aluminum alloy radiator of the controller,send out the

internal temperature effectively.

12.

The locked-rotor protection function limmediately cut off power after

impeller jammed.)

13.

Abnormal alarm function, warn you to handle various abnormal

problems of the pump in time,avoid unnecessary losses.

Installation

1. Notify your dealer immediately if there are external damages.

2. Compare the line voltage IV) and frequency (Hz) of your electrical circuit

with the data on the model plate,these data must agree.

3. Connect the pipeline in needed,attention,when finish the installation,the

piping system shall not have bubble,hose connection diagram is as follows

This product is equipped with a variety of outlet,in accordance with the need to

select one of them. Tighten the nut clockwise, then connect the hose,Seated it

after the counterclockwise rotation of the nut.

4. Attention:the pump must below the level of water 20 cm at least,the place -

ment surface must firm and maintain the pump level.

5. Do not place the pump directly in the pond floor mud,place it on a raised

surface.

6. Connecte the pump with the controller of four core wire,lock the nut,as pic

7. Connect the power supply of the controller.

www.aquaristikwelt24.de

S e i t e

By Aquaristikwelt24