DIAMO ONE Manuel de l'utilisateur - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DIAMO ONE. DIAMO ONE 20 pages.

Imprimer la page

Troubleshooting

Problem
Can't power on the Diamo
One
Power button LED flashes
red quickly
Power button LED flashes
red slowly
I've frothed some milk
and the Power button LED
flashes red
Power button LED flashes
green slowly
None of the top buttons
respond when clicked
Single (Espresso) LED
flashes slowly
Coffee flows weakly or not
at all from the spout
When brewing coffee with
a pod, water comes out
instead of coffee or the
coffee is extra-weak.
14
Cause
•
Damaged Power
Cord
•
Faulty power outlet
•
Not enough water in
the tank
•
Coffee/Steam knob
in the wrong
position
The Diamo One is in
sleep mode
The Steam Tube clean-
out process has not
been performed.
Time to descale the
Diamo One
Pod Slot Cover is open
"Rinse cycle and clean
Recycle Box" reminder
Spout nozzle dirty or
blocked
Coffee pod is in the
wrong position or
broken
Solution
1.
Unplug and check the
Power Cord for damage.
If OK, continue.
2.
Leave unplugged for at
least one minute, then try
again.
1.
Fill the Water Tank
2.
Turn theCoffee/Steam
knob to the "Coffee"
position
3.
Restart by pressing the
Power button
Click the Power button to
wake it up
See Frothing Milk Step 5
(pg. 5)
See Descaling your Diamo
One (pg. 12)
Close the pod slot cover
1.
Empty the recycle box
2.
Push the Single
(Espresso) button once
3.
Run a rinse cycle into a
cup (push Single button
without a coffee pod in
place)
See Descaling your Diamo
One (pg. 12)
1.
Open the Pod Slot Cover
and check that the pod
is centered in the slot and
is not folded over.
2.
Replace the pod if broken.
3.
Close Cover and resume.