Miller TM-268 Manuel technique - Page 24
Parcourez en ligne ou téléchargez le pdf Manuel technique pour {nom_de_la_catégorie} Miller TM-268. Miller TM-268 44 pages.
SECTION 9 − DISASSEMBLY AND REASSEMBLY
9-1. Disassembling/Reassembling 4 kW Generator
TM-4414 Page 22
2
1
Apply SAE 30W oil to
both ends of studs
Use Section 8-2 to determine if trouble is
in stator, rotor, control box, or combina-
tion of these components.
1
Rotor
2
Stator Assembly
!
Use hoist and lifting strap to care-
fully
generator .
!
Do not damage rotor or stator
windings during this procedure.
.
Mark electrical leads before disas-
sembling unit.
Reassemble generator parts.
Reconnect all leads. Use cable ties to
secure leads away from moving or hot
parts.
before installing.
disassemble/reassemble
.
A
95 in lb (10.7 N
m)
Tools Needed:
250 654
Belt/Hydraulic-Drive Generator