Burkert 6519 Manuel d'utilisation - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Burkert 6519. Burkert 6519 17 pages. Solenoid valve
Également pour Burkert 6519 : Manuel (4 pages)
Imprimer la page6
ASSEMBLY
6.1 Safety instructions
DANGER!
Risk of injury from high pressure in the system!
▶ Turn off the pressure and vent the lines before loosening lines or
valves.
Risk of injury due to electrical shock!
▶ Before reaching into the device or the equipment, switch off the
power supply and secure to prevent reactivation!
▶ Observe applicable accident prevention and safety regulations for
electrical equipment!
WARNING!
Risk of injury from greatly accelerated device parts and uncon-
nected whiplashing compressed air hoses!
▶ Before pressurizing the valve, check that all screw connections
and screw joints are tight and secure.
Risk of injury from improper assembly!
▶ Assembly may only be carried out by authorized technicians and
with the appropriate tools!
Risk of injury from unintentional activation of the system and
uncontrolled restart!
▶ Secure system against unintentional activation.
▶ Following assembly, ensure a controlled restart.
6.2 Installation of the pilot valve
WARNING!
Risk of injury from leaking valve.
▶ Ensure that the O-rings/seals are correctly seated in the valve.
Overheating, risk of fire!
Connection of the coil without pre-assembled valve will result in
overheating and destroy the coil.
▶ Connect the coil with pre-assembled valve only.
Danger due to electrical shock if coil incorrectly installed!
▶ During installation ensure that the coil is situated firmly on the
housing cover so that the protective conductor connection of the
coil is connected to the valve housing.
NOTE!
Caution risk of breakage!
• Do not used coil as a lever arm.
english
9