AquaOne CBG-500 Manuel d'instruction - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} AquaOne CBG-500. AquaOne CBG-500 12 pages. Hang on back filter

Imprimer la page

Troubleshooting

Problem
1. Beneficial bacteria not
establish in the new filter.
2. Not the right size.
Dirty
3. Too many livestock
Water
4. Dirty filter pads
5. Dirty quartz tube
6. Water extremely dirty
1. Filter not plug into power.
2. UV bulb burn out.
UV Light
3. On / Off switch on Off
Not On
position.
1. No water in filter body.
2. Filter not plug into power.
No Water
3. lntake cover clogged.
Come Out
Storage
In order to prevent the frost, the equipment must stop using, drain the water,
clean and check. Then store in a dry place.
Technical parameter
Model
Voltage
Flow rate
UV wattage
Pump wattage
Suitable aquarium
size
Product dimension
By Aquaristikwelt24
Cause
1. Dose some bacteria into the filter and
more about Nitrogen Cycle in Aquarium
2. Upgrade to a larger filter.
3. For reference only: 1 inch of fish per gallon of tank
4. Clean the filter pads.
5. Clean the quartz tube.
6. Do 50% water change.
1. Plug filter to power outlet.
2. Replace 5W UV bulb.
3. Push the switch to On position.
4. Put tank water in filter body.
5. Plug filterto power outlet.
6.
CBG-500
CBG-500S
220-240V/50Hz 110-120V/60Hz
500L/h (132GPH)
5W
5W
38-115L (10-30 US Gai)
192x110.5x165mm
www.aquaristikwelt24.de
water.
Clean intake cover
CBG-800
5W
75-190L (20-50 US Gai)
Solution
tank.
(Learn
Online).
CBG-800S
800L/h (211GPH)
5W
229x127.5x179mm
10 |
e
S e i t