ABB FBIP-21 BACnet/IP Manuel d'installation et de démarrage rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et de démarrage rapide pour {nom_de_la_catégorie} ABB FBIP-21 BACnet/IP. ABB FBIP-21 BACnet/IP 2 pages. Bacnet/ip adapter module
Également pour ABB FBIP-21 BACnet/IP : Manuel d'installation et de démarrage rapide (2 pages)

Imprimer la page

Start-up

To control the drive with the adapter module, set at least the basic parameters listed in the table

below. For full parameter descriptions, refer to the adapter module's user manual or to the drive's

firmware manual.



Basic parameter settings

Index

Name

20.01

Ext1 commands

22.11

Speed ref1 source

28.11

Frequency ref1 source

50.01

FBA A enable

50.02

FBA A comm loss func

51.04

IP configuration

51.05...08

IP address

51.09

Subnet CIDR

51.14

Device obj ID lo

51.15

Device obj ID hi

To take the settings into use, validate and refresh the parameters with parameter 51.27 FBA par

refresh.



Connectivity configuration

The FBIP-21 adapter module has a web page for connectivity configuration.

To access the web page:

1. Open a web browser and type the IP address of the adapter module in the address field.

The IP address is visible in group 51, parameters 5...8.

Example: https://192.168.0.24/

2. Log in with a user name and a password.

The default user name: admin

Password: The last six digits of the MAC address of the adapter module, in upper case letters,

without hyphens. The MAC address is visible on the front cover of the adapter module.

Example: If the MAC address of the adapter module is 00-1C-01-00-2F-73, the password is

002F73

Further information

See the latest version of FBIP-21 BACnet/IP adapter module

user's manual (3AXD50000028468 [English]) in ABB library

(www.abb.com/drives/documents).

FBIP-21 manual

abb.com/drives

Specifications subject to change without notice.

Value

Fieldbus A

FBA A ref 1

Enable (or select the option slot in which the module is installed).

This activates the communication module. The HOST LED becomes green.

Fault

Set the IP address according your network configuration.

Set a unique device object instance value for BACnet devices.

For more information on ABB fieldbus options and protocols,

see the fieldbus communications web page

(new.abb.com/drives/connectivity/fieldbus-connectivity).

Fieldbus communications web page